MUNICH, 13-11-2014 — /EuropaWire/ — The Munich-based WACKER chemicals group has developed a thermally conductive adhesive for electronics applications. The new silicone rubber with the trade name SEMICOSIL® 975 TC is characterized by high thermal conductivity and good flow and processing properties. Even light pressure is enough to form an ultrathin adhesive layer between the contact surfaces. This ensures not only good bonding, but also optimum heat dissipation by the heat sink. SEMICOSIL® 975 TC is an ideal interface material for forming thermal and mechanical connections in power electronics components or packages.
SEMICOSIL® 975 TC is an addition-curing silicone rubber that cures at temperatures above 90 °C. The one-component adhesive is electrically insulating and adheres to many of the substrates used in electronics. One of its key characteristics is its high thermal conductivity of 4.3 W/mK (as per ASTM D5470). It also offers good processability, despite the fact that it has a high filler content which is necessary to achieve the requested thermal properties.
Before it cures, SEMICOSIL® 975 TC is a very pasty, non-sag material that becomes progressively free-flowing with increased shearing. This property can be precisely adjusted to processing requirements. As a result, SEMICOSIL® 975 TC – unlike comparable previous products – can easily be fed at low pressure, and applied as a bead. It can be processed directly from the pail or from a regular cartridge.
The rheological flow properties of SEMICOSIL® 975 TC also offer advantages for further processing. When a part is pressed in place, the applied silicone forms an ultrathin adhesive layer which conforms to the substrate surface without the need to apply high force. The minimum layer thickness (bond line thickness) that can be applied is between 90 and 100 micrometers, with its usability depending on the design of the interface.
SEMICOSIL® 975 TC is thus ideal for use as a thermal interface material in power electronics. The purpose of such materials is to fix semiconductor devices – such as insulated-gate bipolar transistors (IGBT) – in engine control units and LED components on heat sinks in order to dissipate the heat. Without heat dissipation, the service life of electronic devices would be considerably impaired.
As a thermally conductive adhesive, SEMICOSIL® 975 TC reliably couples the electronic component to the heat sink. The adhesive layer compensates for microscopic irregularities in the surfaces, thereby maximizing the contact area and – thanks to the product’s high thermal conductivity – optimizing heat dissipation.
Contact
Wacker Chemie AG
Media Relations & Information
Florian Degenhart
Tel. +49 89 6279-1601
Fax +49 89 6279-2877
Email florian.degenhart@wacker.com
Send Message
###
(IN BRIEF) BevZero, a global leader in beverage innovation, takes a significant step towards sustainability…
(IN BRIEF) The Lenzing Group announces the Lenzing Young Scientist Award at the Dornbirn Global…
(IN BRIEF) Josée Ouellet, Vice President of Services for Alstom in North America, has been…
(IN BRIEF) Alstom was honored with the 2024 Hydrogen Mobility Award at the 2024 Canadian…
(IN BRIEF) Alstom's Innovation Station in Stockholm has initiated a pioneering two-year collaboration with Tåg…
(IN BRIEF) Alstom's industrial site in Catalonia welcomed Spanish Minister of Transport and Sustainable Mobility,…